Call Savance Workplace Call Us: (248) 478-2555

Support Suite

User Login



 

Main

Knowledgebase: Technical
Run v10 On-Premise Installer in Advanced Mode
Posted by Travis Fleenor on 23 July 2018 02:52 PM

For version 10.0.45, and up On-Premise installer in advanced mode, you must use this command line entry:

  1. Place the installer .exe file in a known location.  For example: C:\Installer\
  2. Open a Command Prompt as Administrator
  3. Type (or paste) the following command replacing this version number with your version number without the periods:

    “C:\Installer\EIOBoardServerInstaller10045.exe” IS_ADVANCED_MODE=True

It's recommended to only use the Advanced Option Installer in rare cases and at the instruction of an EIOBoard Support Admin.